Product Specifications
| Specification | Product Details |
|---|---|
| Product | LOYO Galaxy 7 Inch RGB Jeep Headlight |
| Model Number | LY-SS7-001-RGB |
| Size and Voltage | 7-inch round · DC 9–16V |
| Beam Power | 30W low beam · 60W high beam |
| Beam Output | 3,000LM low beam · 6,000LM high beam |
| Light Source | Philips LEDs · 1 low-beam LED · 3 high-beam LEDs |
| White Light Color | 5700K |
| Lighting Functions | High beam · low beam · RGB halo · amber turn signal |
| RGB Control | Bluetooth and controller · 16 million colors · 121 preset modes |
| Housing and Lens | Black die-cast aluminum housing · PC and PMMA optics |
| Protection | IP67 · breathing valve · built-in EMC |
| Rated Service Life | 50,000+ hours |
Product Package
| Package | Dimensions | Gross Weight | Quantity |
|---|---|---|---|
| Single Set | 38 × 20 × 15 CM | 2.6 KG | 1 SET |
| Master Carton | 41 × 40 × 47 CM | 15.8 KG | 6 SET |
Galaxy RGB Jeep Headlight Details
LOYO Galaxy 7-inch RGB Jeep headlights combine white high and low beams, a color-changing halo and an amber turn signal in one round housing. Use the 5700K white beams to light the road or trail. Use the RGB halo to change the Jeep’s look at shows, meets, off-road events or while parked.
Change the Halo Color by Bluetooth
The Bluetooth RGB halo offers up to 16 million color choices and 121 preset modes. Adjust the color, brightness and light effect to match a show build, club event or off-road setup.
The RGB halo works separately from the white high and low beams. Changing the halo color does not change the 5700K light used by the main headlight.
White Beams for the Road Ahead
The 30W low beam is rated at 3,000 lumens for close and mid-range lighting. Switch to the 60W, 6,000-lumen high beam when you need to see farther down a dark road or trail.
A Z-shaped low-beam cutoff helps place more light below the cutoff line. Aim both headlights after installation, especially if the Jeep has a lift kit or a changed ride height. Follow the Jeep headlight aiming guide before driving at night.
Amber Turn Signal Built into the Halo
The amber turn signal gives other drivers a clear sign when you change direction. It uses a separate signal connection instead of asking the RGB color effect to act as the turn signal.
Test the left and right signals before fitting the grille back in place. This saves time if a wire or ground needs to be checked again.
Fitment Checks Before Installation
Confirm the 7-inch mounting opening, retaining ring, rear clearance, connector and 9–16V electrical system before ordering. The halo controller and amber turn signal also need the correct wire connections.
Jeep JL/JLU and Gladiator JT models need a separate LOYO 7-inch headlight bracket kit. The bracket kit is not included with these headlights.
Sealed Housing for Dust and Wet Weather
The IP67 black housing uses die-cast aluminum to move heat away from the LEDs. PC and PMMA parts protect the light and shape the beam.
A breathing valve helps balance pressure when the temperature changes. Built-in EMC helps reduce electrical interference. Seal the added wiring connections during installation so water cannot enter through the wiring.
Vehicle Fitment
| Jeep Model | Model Years | Before You Install |
|---|---|---|
| Jeep CJ | 1945–1986 | Confirm a 7-inch opening and a compatible 9–16V electrical system. |
| Jeep Wrangler TJ | 1997–2006 | Check the connector, retaining ring, rear clearance and added RGB wiring. |
| Jeep Wrangler LJ Unlimited | 2004–2006 | Check the connector, retaining ring, rear clearance and added RGB wiring. |
| Jeep Wrangler JK / JKU | 2007–2018 | Check whether the vehicle needs a wiring adapter and confirm the RGB and turn-signal connections. |
| Jeep Wrangler JL / JLU | 2018–2026 | Requires a separate 7-inch headlight bracket kit. The kit is not included. |
| Jeep Gladiator JT | 2020–2026 | Requires a separate 7-inch headlight bracket kit. The kit is not included. |
A 7-inch diameter alone does not confirm every installation detail. Check the mounting opening, connector, rear clearance, voltage and function wiring before ordering. Some older Jeep CJ vehicles may require an electrical-system conversion to work within the 9–16V input range.
Frequently Asked Questions
What can I control on these RGB Jeep headlights?
Do the RGB colors change the high and low beam color?
How do I install RGB halo headlights on a Jeep Wrangler?
Do Jeep JL and Gladiator JT models need another bracket?
Can I use the RGB colors on public roads?
What are the package dimensions and weight?
Fitment and Installation Help
More Information for Your Jeep Build
Check fitment, plan the wiring and choose the parts needed for your Jeep before installation.
See how RGB halo controls, fitment and road-use limits affect your choice.
Add the mounting parts required for Jeep JL/JLU and Gladiator JT applications.
Compare other 7-inch round headlight designs and lighting functions.
Set the low-beam position after the new headlights are installed.
Wholesale and Sample Orders
Samples are available at wholesale price. Use the quote button above to request current pricing, sample availability, packaging details or help checking fitment for your market.
